Additional heavy base for original brass heat-set insert tool from atok
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additional heavy base, designed to prevent the tool from tipping over.
- Ocena
- 5 / 5
- Polubienia
- 259
- Pobrania
- 313
- Wydruki
- 1
- Wyświetlenia
- 4998
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This additional heavy base is designed to prevent the original brass heat-set insert tool from tipping over.
Print it and fill it with any heavy parts you have lying around (I fixed the inserted screws with wood glue to reduce noise). Use 3.5 mm countersunk screws with a maximum length of 16 mm to mount the lid. Then attach this part to the original base of the device using double-sided tape. There is a hole to secure the screws of the arm to the base.
It’s also a remix of my own shared case: https://www.printables.com/model/863273-easy-customizable-parametric-electronics-project-b
I'm also providing the SCAD file here, in case someone would like to improve it further. Please understand, that I cannot offer any support for this – thank you.
I’d like to thank atok (https://www.printables.com/@atok_231604), the creator of the original brass heat-set insert tool, for sharing this great design with the community. I like it so much that I was inspired to create this additional part.