1 / 9
SDS drill bit holder — zdjęcie 1
1 / 9

SDS drill bit holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Its a sds drill bit holder and hanger

Ocena
5 / 5
Polubienia
15
Pobrania
39
Wydruki
2
Wyświetlenia
253
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

SDS drill bit holder was made because i had all my sds drill bits just sitting in a tub so i made a holder and a hanger for them the holder was made with TPU with a 0.2 layer height and a 15% infill and 3 perimeters i also used gyroid infill this was printed on my mk3.5s i coloured the letters in with a pen i used TPU as seems to grip the drill bit tighter

The hanger was printed in PET-G using a 0.2 layer height also 15% infill and 3 perimeters and gyroid was used also i printed this on my mk4s you just need a couple of small screw to attach you can get 6 holders on a hanger

No supports needed

Tagi