Quick-release holster for Finisher 3.X Nerf blaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You never know when you’ll need to draw your Finisher. This holster lets you keep it close and draw it really fast!
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hey guys,
I promised you quick-release holster for my Finisher blaster design, and this is it!
I'm quite satysfied how it came up. I planned to make it with no non-printable hardware, but it turns out to be a bit more challenging, so you will need one string and 2 screws. Otherwise it is pretty easy print.
This holster is compatible with Finisher 3.0, and 3.1 with both long and short drum version. You can find all related models in this collection
https://www.printables.com/@SSmithy_3054362/collections/2397585
As usual
If you need this holster, you probbably already have one of my blaster designs. I make them public for free, so you don't have to, but I would like you to consider to help me cover my expenses for development of this design a bit.
I spent tens of hours on this design and hundrets on the blasters, so if you like it — or if you're just curious about what might jump out of my head next time — you can support me here:
https://buymeacoffee.com/ssmithy
or here if you prefer crypto:
https://nowpayments.io/donation/SSmithy
If it happens that you'd like to use this design commercially, let me know in a DM. We'll see what we can do.
Check it out in action!:
Parts:
H01_Body.stl
H02_Cover.stl
H03_Clip.stl
H04_Button.stl
Spring - L=18 mm, d=6 mm
Materials
If I wanted to eliminate supports on the H01_Body part, I would have to altered the design in such way, i don't like, so as you can see on the picture, there is a lot of space for strings. Therefore is easier to print this part from PLA. With 4 perimeters it will be stury inaf.
Parts H02 and H03 are quite easy, you can use PLA, or PET-G as well.
However I strongly recomend to print part H03_Clip of PET-G, it needs to be springy.
Check also the .3mf file fr further information
The spring:
I have a lot of these springs from pens (L=18 mm, d=6 mm), they don't have to be particulary strong, if you manage to make the button move smoothly. In the .3mf file there is spring slot made by negative solid, so you can adjust the hole for different spring.
Horizontal alternative:
In the .3mf file you can also find horizontal variatoin of this case. Slots for clips are made by segative solids too, so you can move them, or even adjust the nuber of them.
I consider this variation of minor use, so I didn't put much energy into it in this guide. If you need more iformation about it, let me know.
Assembly
