1 / 3
.50 BMG Bottle Opener
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
50 cal bottle-opener for when you need to open the tougher bottles. 1:1 Scale
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 641
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (23)Powiązane
1:1 .50 BMG bottle-opener
The creator of original model reccomends 90% concentric infill and a horizontal orientation for PLA.
I would recommend an equal infill density for the weak points if you are using PET-G.
There is a PET-G print file with supports and adaptive layer infill included. I printed my bottle opener in vertical orientation and had no stability issues. The bottle oppener has been in use for several weeks now.
remixed from: https://grabcad.com/library/50-bmg-bottle-opener-1