1 / 5
Lego cup soda can koozie - can holder — zdjęcie 1
1 / 5

Lego cup soda can koozie - can holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lego cup resized to perfectly hold a 12 ounce soda can!

Ocena
4,9 / 5
Polubienia
409
Pobrania
1262
Wydruki
8
Wyświetlenia
3875
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Lego cup resized to perfectly hold a soda can!

0.28 layer height is fine (unless you want more detail). You'll need supports for the handle and the shallow cylinder under the base, but the outer brims are designed to be support free (a slight deviation in design from the actual Lego cup).

I've used this design for a few years now (sorry I haven't posted it until now!), and there is a noticeable difference in how it keeps your can cooler through the insulation of your infill.

Designed by hand to fit a standard soda can (12 ounces / 355 ml). Tall cans (see final pic) kind of work, but stick out a bit).

Enjoy!

 

When the can is empty you can see how perfectly fitted it is as it slowly falls into place.

 

 

 

 

Tagi