PS5 One Handed Clip On Adapter - Right Handed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This gives you full control over your PS5 controller with just your right hand
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 607
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The textured pad on the end of the joystick arm rests on a desk or your leg and the controller is moved around to move the right stick. The levers on top allow you to flick up with your middle and index finger to control L1, R1, R2 and L2. The D pad extenders mirror the D-pad, but bring it close to your right hand for easier access. Video assembly and design update vids linked below.
Print in PLA Pro or PLA+ (I find Elegoo PLA+ works great). Body can be PETG but the Button and Options button Extenders need to be PLA Pro or +. PETG is too flexible for them and PLA + has a good mix of strength and rigidity for the whole of this print.
Gyroid infill 30% for "main body" and "joystick arm"
Gyroid infill 40% for all other parts.
Normal auto generated supports for share button lever.
Tree auto generated supports for the rest of the parts.
Wall loops - 4 for all objects.
Objects are already properly oriented for best print quality if using 3mf in bambu studio.
Set the Threshold Angle for the supports to 49% when printing the button extenders. Otherwise, the support will not print underneath the part that touches the button. I have the Threshold Angle set to 49% for all objects anyways and that works fine.
If you would like me to print one for you, check out these links:
https://www.ebay.com/itm/146712860979
IG: https://www.instagram.com/criticallayer3d/ - gameplay vids
Youtube: https://www.youtube.com/@CriticalLayer3D - gameplay and assembly vids
Here's an example of some gameplay:
Full assembly guide: