Vacuum Sanding Table Plate for Makers & Woodworkers (circles) - Fully Customizable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A customizable sanding box top plate designed for dust control. Fully parametric in OpenSCAD – adjust size, hole spacing
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
First make gets a coffee!!!
🪚 Parametric Sanding Box Plate – Dust Control for Makers & Woodworkers 💨
Looking for a cleaner way to sand your prints or wood parts? This customizable sanding plate turns any box into a vacuum-powered sanding station — perfect for 3D printing fans, woodworkers, or DIYers who care about keeping dust out of the air and lungs.
Simply mount the plate on a sealed box, hook up your shop vac or dust extractor, and sand directly on top. Fine particles are pulled through the grid of holes, reducing cleanup and mess.
🧰 Features
🧩 Fully customizable (via OpenSCAD):
Plate width, length, thickness
Hole diameter and spacing
Edge margin (keep holes away from screw holes or clamps)
🔄 Parametric design — easily remix and rescale
🖨 Flat-printable (no supports needed)
🛠 Fits most vacuum boxes or can be dropped into a simple MDF frame
🖨 Prusa MK4S Print Settings (PETG – 0.25mm SPEED Profile)
Feature | Value |
|---|---|
Printer | Prusa MK4S (0.4 mm nozzle) |
Layer Height | 0.25 mm SPEED mode |
Filament | Prusament PETG |
Infill | 15% (grid) |
Supports | None |
Plate Size | 200 mm × 150 mm × 5 mm |
Filament Used | 92.08 g (30.14 m) |
Estimated Print Time | 3h33m (Normal Mode) |
First Layer Time | 26 min |
Cost (at €30/kg) | €2.76 |
⏱ Feature Breakdown:
Feature Type | Time | Filament (g) |
|---|---|---|
Perimeters | 31m | 15.11 g |
External Perimeter | 28m | 13.29 g |
Internal Infill | 26m | 16.49 g |
Solid Infill | 54m | 32.86 g |
Top Solid Infill | 13m | 6.70 g |
Bridge Infill | 18m | 7.58 g |
Other | 5s | 0.06 g |
📦 Download Includes
Vacuum_Sanding_Table.scad – parametric OpenSCAD source
Vacuum_Sanding_Table.stl – example build (200×150×5 mm)
📄 Print profile info (as README)
🔧 Tips & Suggestions
Clamp or screw the plate to a sealed box for best vacuum suction
Works best with a shop vac or cyclone separator
Use PLA for easy printing, PETG for strength, or even wood-filled filament for a nice workshop look
💡 Remix Ideas
Add a rounded edge to the port holes
Make larger plates with split parts and joining tabs
Insert magnets or gasket strips for snap-fit builds
🙌 Share Your Build
Print it, build it, and tag your photos!
This design is open-source and made for sharing — perfect for remixes and workshop improvements.