1 / 3
SilverStone RM41-506 Front-Cover(-Frame) (3x 5.25" bay) — zdjęcie 1
1 / 3

SilverStone RM41-506 Front-Cover(-Frame) (3x 5.25" bay)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This allows you to use the original front covers, when you cannot fit your GPU/PCIe card and the original 5.25" cage.

Ocena
0 / 5
Polubienia
2
Pobrania
25
Wydruki
0
Wyświetlenia
193
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
GNU General Public License v3.0

I bought the SilverStone RM41-506 and couldn't fit my GPU together with the 3x 5.25" cage.
So I had a hole in the front of the case.
I liked the original covers the case came with, so I tried to essentially copy the original cage's dimensions and made it shorter.

I printed the model laying on its back with support trees for the 2 screw 'holes' on the top.

 

There are 2 known issues:

  • It is only attached at the top, so you can push it inside at the bottom
    • But it holds itself for me, as long as I don't push against it
  • The 2 screw ‘holes’ at the top to not have any threads
    • I heard a crack when screwing them in, but they are still holding – Your mileage may vary

 

This is one of my first own 3D models ever, let me know if there is somebody out there that has/had the same problem as we with the same or a similar case ^^

Tagi