1 / 3
19 to 21.5mm barbed hose adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed an adapter for a dishwasher drain hose late at night, so I made one!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed an adapter for my dishwasher drain outlet hose late at night, so instead of waiting for the shops to open the next morning, I printed one!
No supports needed - Model will load upside down in .stl so print on wider end!
80mm length
21.5mm end with 24mm wide barbs
19mm end with 21mm barbs for the first 2 and 22mm for the last
15mm passage with chamfer on inside of wider end to keep wall thickness at each end similar
Printed on Creality CR-10 SE
PETG
0.6mm nozzle
0.2mm layer height
enough walls that it prints solid