Shelf Bracket Topology Optimized
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shelf bracket, topology optimized, 4 mm screws, minimal supports
- Ocena
- 4,875 / 5
- Polubienia
- 596
- Pobrania
- 1478
- Wydruki
- 8
- Wyświetlenia
- 6687
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Shelf Bracket Topology Optimized
This is a lightweight, topology-optimized shelf bracket designed for strength and minimal material usage. Its organic structure ensures high load capacity while maintaining an elegant appearance.
Dimensions: 150 mm wall side × 200 mm shelf side
Mounting holes: 4 mm diameter, suitable for standard 4 mm screws
Support-efficient design: Optimized for 3D printing with minimal supports
Installation: Designed for mounting to both wall and shelf
Recommended print settings:
Material: PETG or PLA
Layer height: 0.2 mm
Perimeters: 3 or more (depending on load)
Infill: 30–50% (gyroid or cubic recommended)
Orientation: Print with the longer (200 mm) shelf side flat on the print bed
Supports: Enable tree supports for optimal results
Perfect for modern or industrial interiors where strength and design go hand in hand.