panBot mini (quick and dirty :))
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
panBot Mini quick and dirty This small robot car is printed quickly and can therefore be used quickly. The Super:Bit…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 699
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
panBot Mini quick and dirty
This small robot car is printed quickly and can therefore be used quickly. The Super:Bit is pushed on it and therefore no further lid or anything else is needed. Body and 4x wheels print. For the grip you can use O-rings. 4 cable ties have been used for the attachment of the motors. The engines are N20 engines. A fast project that can be implemented in a short time.
The wheels can be found here: https://www.thingiverse.com/thing:3275522 (PLAWheelHubs.stl)
Makecode Ultrasonic Sample: https://makecode.microbit.org/_bCi00DLM3Tty
Youtube Ultrasonic Sample: https://www.youtube.com/watch?v=LsR40M8UBUs
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament: gst3D PLA
Category: Robotics