Federal Signal "Canadian" Model 2-3Z - Printable (V1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini 3D printed FS Model 2-3Z.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
~ 1/2 scale
Made COMPLETELY on Tinkercad (including chopper): https://www.tinkercad.com/things/2ZpESAWSAzF-fs-canadian-model-2-3z
PRINT ALL PARTS SEPARATE
The stator and rotor should fit inside the housing with compatibility with an XD-775 (single shaft, ~8000 RPM 12VDC) model DC motor. This motor should also fit inside the housing and below the core. A 12VDC 5(?)A potentiometer set to the right tuning also fits above the core.
Link to potentiometer (to limit revs to ~7000): https://tinyurl.com/hcrzp5zh
Do not scale anything in Cura. (12% infill recommended.)
Link to EXACT motor, refer to picture with the specifications: https://tinyurl.com/3cbmknhp
built for country I live in hehehehaw