1 / 2
Velux replacement Pin / Putzriegel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for Velux windows
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement for Velux pins. I printed it on a P1S in PLA witht the 0.2mm preset but durability is not tested yet. As for settings i would enable small overhangs since there is a Overhang used to keep the part in the metal rail. Also i would recomend printing it laying down not standing up on the handle since the layerlines are much better in the laying down orientation