1 / 8
Anycubic Kossel Power Supply (PSU) Shroud/Cover — zdjęcie 1
1 / 8

Anycubic Kossel Power Supply (PSU) Shroud/Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I modified the PSU Shroud by Haabilo to provide venting without me having to look at the wires all the time (wholes…

Ocena
0 / 5
Polubienia
3
Pobrania
33
Wydruki
0
Wyświetlenia
346
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I modified the PSU Shroud by Haabilo to provide venting without me having to look at the wires all the time (wholes are on the bottom and the back of the shroud).

Print Settings

Rafts:

Doesn't Matter

Supports:

Yes

Notes:

Haabilo recommends "Concentric infill works really well with the bottom and doesn't try to add little dollops of infill between the vertical walls." - I missed that part and it was rediculous watching the printer "filling" the gap between the walls, so you might want to be more clever using concentric infill ;-)

Category: 3D Printer Accessories

Tagi