Legs for VIZIO V-Series 50" Class 4K HDR Smart TV (V505-J09)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These legs integrate a space for the sound bar, at long last!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 498
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So, after I put together our Vizio television a while ago, I was deeply disappointed at the lack of design integration for the sound bar. It either had to sit in front of the legs, or way behind, and the angle and spacing of the legs was — I'm being as kind as I can be — just really stupid and ugly.
So here's this new design, integrating a space for the sound bar to sit logically underneath the set. The minimalistic angular geometry creates almost no need for support (only the draft angle at the joint block needs a smidgen).
This is designed specifically for the Vizio V505-J09, but it looks like some other models may have the same joint block. So I'm including a model of the joint block alone for you to test. If you like the stand but the joint block doesn't work, LMK. If you supply precise dimensions for the block, I can whip up another version that works.
Incidentally, to reinstall the legs with an OEM replacement costs about $35 (about $8 for material and $27 for greed, given the lack of thoughtfulness put into the original design… just sayin'). So this is a pretty good deal! The only issue here is size: you need a large-format printer (I can print this on the Prusa XL or the Anycubic Mega X we have in the shop), or else you need to cut it in the slicer and glue the parts together. I suggest doing that somewhere behind the joint block, where it would barely be noticeable.
NOTE: Mirror the model to make both feet! Right-click on a copy of the model in the slicer and choose the mirror option from the drop-down menu.
UPDATES
6 Feb 2026: Updated with instructions on mirroring.
23 Aug: I've added a third piece, a support in case you decide you want more stability. I found my own print worked well, but it did shake a little when you touched the television, so I added this little piece afterward. It has a circular bump that registers with one of the screw holes at the top, and a trapezoid bump on the bottom that registers with the screw access hole at the bottom. Holds in with pressure and friction, no need for glue or hardware. There is a small window built in so that you can still see the sound bar lights. When printing, print two and mirror one of these for a symmetrical pair in the slicer. Prints without support.
7 Aug: This model was incorrectly tagged as AI. All my Printables work is AI-free, so this has been corrected.