Jar Lid for Glasware
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printable lid with breathable mesh for a 5L jar. Scalable for use with other types and sizes of glasware.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi,
This model is a custom lid featuring a mesh clamp that ensures optimal airflow while providing a protective barrier against insects and dust. The breathable design helps maintain freshness by minimizing condensation buildup inside the jar.
My glass jar has an opening of approximately 108 mm. If your jar differs in size, scaling both rings in your slicer software should allow for a proper fit.
Inner diameter: 109.7 mm (103.5 mm on clip part)
My print settings:
0.4 mm nozzle @ 0.25 mm layer height
Material: matte PLA, Elegoo
3 perimeters
10% gyroid infill
Supports: no
Brim: no
Print time: 45 min
Filament used: ~27 g
Update 05.07.2026
I printed a few more in different sizes (just another scaling factor in the slicer) for my kombucha glasware. Works well with a paper towler as filter.
Happy Printing!