1 / 2
Adventure Force Desperado 10 shot Boomco Cylinder — zdjęcie 1
1 / 2

Adventure Force Desperado 10 shot Boomco Cylinder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 10 shot Boomco dart replacement cylinder for the AF Desperado!

Ocena
0 / 5
Polubienia
10
Pobrania
14
Wydruki
0
Wyświetlenia
178
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This cylinder replaces that dusty old 6 shot full length 50. cal cylinder with a 10 shot cylinder firing Mattel Boomco darts!

Performance is around stock, but with my AF Desperado Full Upgrade Kit (found on Etsy.. for now..), this cylinder can fire both gen 1 and gen 2 Boomco darts at over 90fps!

DIMENSIONS: about 80mm tall. This item can print on any printer with a Z height of 80mm or more.

INSTRUCTIONS: A relatively simple replacement. Use a 16mm Nerf type screw to screw the rotator key to the rotator body, and use the metal dowel from either the old stock cylinder or old stock rotator to stick into the bottom of the new rotator body.

REQUIRED MODS: There are none! A 100% drop in cylinder, and it's completely reversible!

You MIGHT want to remove some material from the top side of the muzzle. If the rotation is not perfect, the darts can hit the top of the muzzle and cause problems.

PRINT SETTINGS: Minimum 3 walls, 4 top/bottom layers, print the key and rotator body solid.

Compatible mods: AF Desperado Full Upgrade Kit: 
 

Tagi