5th Gen Ram 1500 Tow Hook Bushings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bushings for bolting on tow hooks to my 2019 Ram 1500 Bighorn.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With the hopes of saving some money, I bought some used tow hooks for my truck off Facebook Marketplace.
The bushings were pretty well shot, so I did my best to reverse engineer and print a set.
Made with Polymaker TPU 95A, I set OrcaSlicer to 99 walls and 100% infill.
Printed with organic supports.
Parts seem plenty stiff and -should- work well. Only concern I have so far is the thin section where the groove on the OD nearly meets the chamfer on the ID. Pics attached.
As of 7/29/25 I have NOT installed these yet. Will update when I do.
Sharing this on Printables for others to make for themselves, however I ask that this file to not be sold commercially.