Print Settings Comparison Tool-Infill Swatch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy swatch to modify to make changes to settings and update text to match
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
Here is a much more functional infill swatch/sample than I have seen around. I created it in Creality Print 6.2.
It can also be used to compare other settings as I do herein with the AI infill setting on one object but not the other.
You can clone the object and easily make changes for comparison by using the "By Object" view in settings. If you create multiple copies with different infill patterns or other settings remember to change the text for any of the cloned samples.
I have a CFS for multi-color printing but the design allows for only one filament change for text color if you do not have multi-color printing options.
Or you could just print this in one color. This could probably be adapted to other slicers if they allow settings by object but in any case you could print them one at a time if needed. You could always change the sizes of the object to accommodate more text space.
When editing the text by, right clicking on the text object, if it is too wide and doesn't fit on the cube, just edit the text and change Height until it fits-again only using by object settings - make sure you are not on global settings
Note: there is nothing keeping the text you enter matching with the settings, so double check this before printing and make sure you are not looking at the global settings since they could be different than the 'by object' setting for a specific object.
I created this in Creality Print 6.2 by creating a cube and then added a part (cube) to that same cube and they occupy the same space. Then I put the text on top so it can easily be edited and other settings changed by object.
You could also compare other settings by using the a different filament profile and compare it to another one but you probably don't need the 0 top layer settings for this.
One last item, if you turn on the "Print by object" setting you can compare print times as well
Nozzle 0.4
Time 20m
Filament, amt PETG, 14g
Speed 250
Layer height .20
Infill, type 15%, grid or whatever you want
Wall loops 2
Supports No
set separately for each object-infill %, infill pattern and others you want to test
Size of bed plate needed-biggest object (if not adjustable)-resizable