Galaxy Z Fold7 thin case with cutout for Ohsnap4/Magsafe ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a cutout for my Ohsnap 4 luxe, so I added a 58mm diameter circle into the rear case.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 1118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
Utilized Samsung's official reference documents (https://developer.samsung.com/mobile/accessories.html) on where the wireless charging coils are located to position the cutout to minimize any interference with wireless charging.
Tested in PLA and TPU - TPU will not stay on the phone, it was too flimsy.
I flattened the models to the plate for easier printing and I wanted the texture from my textured PEI plate.
Even if you don't want to use a case, this is a good model to print out to position your Ohsnap or Magsafe ring onto your Fold7. Having incorrect Magsafe position can cause wireless charging to become unstable, slow, and/or overly hot.