Case for Cytron Maker Uno
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perfect for beginners and project debugging
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
The Maker Uno is an excellent beginner-friendly Arduino board that also works great as a debug device when you plan to move projects to ESP boards or smaller Arduinos later.
Easy to print and assemble. Print the top piece in transparent filament to make the onboard LEDs much more visible during debugging.
Assembly:
- Mount the Maker Uno to bottom case with 4x M3 5mm screws, works with 2 screws if needed
- Join top and bottom cases with 4x M3 14mm screws from bottom up (exact length isn't critical, works with 2 screws if needed)
The four longer screws serve as feet, which works fine on most workbenches. If you're concerned about scratching surfaces, you can print small caps to fit over the protruding screw heads.
Print Settings: Standard settings work well. No supports needed when printed flat