Tube holder for Bestway pools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A support for pool hoses
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hose support for Bestway pools. The other models on Printables did not support the adapter for the larger tube found in bigger pumps so I've created a new one for this use case. I believe this should also work for Intex pools.
The first hole, the one closest to the pool wall, is 40mm while the support arm hole is 45mm. It fits 32mm tubes with an adapter to larger 38/40mm tubes.
Printing
I've printed it with Extrudr DuraPro ASA at 0.20 with the Structural profile on the Core One. I've used a 20% Gyroid infill with 4 perimeter walls. I've also added a box where the arm attaches to the base and bumped the infill density at 25%, and the top solid layers to 7 - you can find it in the .3mf file.
No supports are needed.
Pay attention to the potential shrinkage of the material you are using. For the Extrudr DuraPro ASA it is minimal, but it might not be the same for other materials or suppliers.
PETG should also work but might suffer UV exposure in the long run, while providing more layer adhesion than ASA/ABS. Other sturdy and UV-stable materials should also do the trick.
Design
Design is inspired by the model from @PetrBojar, many thanks to him!
https://www.printables.com/model/72351-pool-hose-holder-for-intex-marimex-bestway-pools