1 / 2
FIFO Can Storage Dispenser clips & pegs no supports needed — zdjęcie 1
1 / 2

FIFO Can Storage Dispenser clips & pegs no supports needed

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print the Clips and pegs for the FIFO Can Storage Dispenser by @CinnamonToast_414749 withotut any supports

Ocena
0 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
159
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

Follow the instructions from the original for assembly just keep in mind you need 2 halfs for each of the rods.

And you need to print the flies from the original as this is ONLY the connectors in this print. (but you can remove the pegs and clips from the original file).