1 / 2
EuroCar Car alarm keyfob keyring (rubber piece for using keyrings)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since the original ripped after 21 years of daily use, I made one.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Since the original ripped after 21 years of daily use, I made one. Hopefully It'll last another 21 years :D
It should fit in the originals place.
These key fobs were originally packed with EuroCar car alarm systems in the 2000s, I have one in my Audi 80 Avant.
Print settings:
- You can print it from TPU for the original-like effect; but PETG works fine for me
- 0.1mm layer height or lower
- Solid Fill
- If possible use a 0.25mm nozzle