replacement hillman 76mm 3inch reflector frame and dual frame upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
replacement hillman 76mm 3inch reflector frame and an upgrade to amek a dual lens holder used to reapir broken parts
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A recent delivery truck backed into my tree even though I had the reflectors on it! These reflectors are not expensive to buy new but I decided to replace the frames since the lens parts were still good. There are two parts included. An original single hillman 76mm 3inch reflector frame and my own upgrade to a dual lens frame.
I printed in ABS since these will be used outside. There is a tiny lip on the back of the frame that the lens snaps into. No glue needed.
Be sure to lay these on the front side in your slicer and no supports needed.