Gutter Bracket with Optional Riser for Outdoor Lighting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This gutter bracket has a built in spacer with optional riser. Fits most standard outdoor fixtures/accessories.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Gutter Bracket for Outdoor Lighting; fits most standard outdoor lighting fixtures with optional 2.5" riser. Lights can fasten directly to the mount or to the riser that is then attached to the mount. The gutter mount has a built in spacer allowing the light to get further away from shingles placing the light about midspan of the gutter. Built in support for durability. Recommend printing at 50-75% infill, 4 wall loops suggested starting point. The riser package in my other post is also compatible with this gutter mount, the risers are compatible with most standard landscaping stakes. Torque setting #4 on an electric drill to mount.
** for the riser, print vertically with MALE threads at the top and Female on bottom without supports; for the gutter bracket print with the top (flat side) face down without supports.
*If printing for outdoor purposes it is recommended to use ASA filament and adjust your print settings accordingly.
if you’d like to leave a tip thank you
Ltc M9w6KnukrPLUT9EZ5YaWtoJe54ZeywG27B
Btc 36dyxiCZzDV4oUDWYgdHkCSjLnBy3LSQDo
Eth 0x6c09555632e886Bb14A2c71E5A8a6c9514e9572F
USDC 0x4e6B8686ACB3f5dcA38AD44d58f8f2Ef85aC138d