1 / 2
Remix of Filarte3D modular shoe rack for four pipe sizes — zdjęcie 1
1 / 2

Remix of Filarte3D modular shoe rack for four pipe sizes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Different regions in the world use different size PVC electrical piping/conduit.

Ocena
0 / 5
Polubienia
22
Pobrania
91
Wydruki
0
Wyświetlenia
546
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This parametric design scales the part sizes automatically to the pipe diameter.

The code should scale the parts to whatever diameter you need, just change the value of the pipe variable.

The holes are made 0.2 mm larger in radius than the pipe diameter to accommodate tolerance in printing and in pipe diameter. This can be seen in the part names where the pipe diameter is shown first, and the hole diameter times ten as the second number in mm

Print with 3 vertical perimeter.
Use autogenerated supports in the horizontal holes.
20% gyroid infill

For assembly instructions see the Filarte3D's picture.
https://www.printables.com/model/170922-modular-shoe-rack

Remix done in Build123d Python code.

Tagi