Hydration / water bladder dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Radek's design. The original design was too large to fit my Camelbak opening.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- GNU General Public License v2.0
See details in Radek's original design. It's basically an air duct to direct air from a 120mm CPU fan into the hydration bladder to speed up drying. Can also work without the fan, to keep the bladder open and facilitate draining / drying. The shoes are optional and should be printed in softer material, like TPU.
The model rev 3 has a tapered air inlet to allow more airflow from the fan. I used Tinkercad, which doesn't seem to make it easy to gradually decrease the diameter of a tube. Maybe one day I'll redo it in OnShape if I get a chance.