1 / 9
Drill-Powered Caulk Gun with Gear Reducer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular caulk/silicone dispenser powered by a drill, featuring a gear-reduction mechanism and two mounting variants
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (24)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (22)Powiązane
This is a drill-powered caulk gun with a compound gear mechanism that translates rotary motion into a strong linear push.
The model includes two drill mounting options:
- A-type: Clamp-on mount for secure tightening
- B-type: Snap-fit quick attachment
Key features:
- The main rod uses a trapezoidal/threaded power screw that holds axial load efficiently
- The plunger is printed horizontally to ensure strength along the layers
- Gears, reducer housing, and piston are best printed in PETG and manually fitted for smoother motion
- All other parts can be printed with PLA
- Use M3x5x5 heat-set inserts (or smaller if needed) and M3 screws in sizes 8, 10, 12, 16, or 20mm — whatever you have at hand
- Thick grease is recommended for the gear train and threaded shaft
Print settings recommendations:
- Infill pattern: Gyroid, 10–25% (not critical)
- Wall count: Increase perimeter count for strength (I used 4) — that's what really matters
- Top/bottom layers: Consider increasing for additional structural integrity
STEP and F3D files are included to tweak dimensions if needed for your printer tolerances.
Related model: https://www.printables.com/model/1062157-electric-silicon-dispencer