Cinelog35 V2 O4 Pro Air Unit Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
O4 Pro camera mount for GepRC Cinelog35-V2. Allows 25º of camera tilt.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 306
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this model based on the CaddX Vista mount that came with the drone. The carbon plate for mounting GoPro is incompatible with the O4 Pro as far as I can tell due to the added height. No big deal as I intended to use the lack of a GoPro to carry a larger battery anyway and the O4 camera is quite good.
There's a channel for the delicate camera cable since cable management on this drone is a challenge.
The prototype in photos is printed in PLA+ but the final version will be TPU. It definitely needs supports. I'm new to Cura but default supports worked very well. (Be very careful if you dare using an Xacto.)