1 / 3
True One Piece Riser — zdjęcie 1
1 / 3

True One Piece Riser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I just combined all the parts and filled all the gaps so I could print the riser on my Kobra 3 Max.

Ocena
0 / 5
Polubienia
2
Pobrania
109
Wydruki
0
Wyświetlenia
698
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Everything is the same as the original so print settings should be compatible. Use mouse ears or brim when printing to prevent warping, as mine did.
The vents still break away like the original from JesusFreak. and the dimensions are still the same.
All gaps are filled for a nice look.
Looking at the other Remixes, I noticed there is an edit with the gap for the bowden tube. I may Remix that to make it one piece as well, or just edit this to do the same.
Let me know if there is interest in this!

Thank you JesusFreak for the superb original design!