Sunbeam Hotshot Bowl Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to allow the use of bowls on a 1990s Sunbeam Hotshot Hot Water Dispenser
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a bowl adapter for a 1990s Sunbeam Hotshot Hot Water Dispenser. It fits over the bottom part that normally holds a cup, and will allow medium to large sized bowls to accept the hot water. Be careful, some bowls with a large diameter or wide lip might not be able to go far enough back to be fully under the water dispenser.
Models available: Original, Text Only, & Nothing
Printed upside down in PETG with 5% infill and 3 perimiters. PLA will likely work well but it doesn't have the same heat resistance. Attach rubber feet to avoid it sliding around, and it should slot perfectly over the machine.