1 / 2
Caps for 1/4 in. Female Quick Disconnect Fittings — zdjęcie 1
1 / 2

Caps for 1/4 in. Female Quick Disconnect Fittings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Caps to prevent foreign object ingress in 1/4 inch female quick disconnect air fittings

Ocena
0 / 5
Polubienia
4
Pobrania
20
Wydruki
0
Wyświetlenia
94
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Caps to prevent foreign object ingress in ¼ inch female quick disconnect fittings. Two sizes are provided. The 7/8 inch cap is shown on an air hose. The 15/16 inch cap is shown on my RV (for the toad's brake controller).

I printed these at 100% infill at 0.2mm structural in Overture TPU using the “Generic FLEX” profile in PrusaSlicer. I found the textured build plate worked best.

Tagi