Vent Redirect - 10" x 6"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Covers a 10" x 6" (inches) vent and directs the air to the side along the long axis. Spots for magnets underneath
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My wife wanted the vent under her desk redirected away from her feet. This solved the problem!
This cover has places to glue magnets to hold the cover onto the vent. It is quite heavy. I am accustomed to designs for outdoor, heavy-duty use and made this more robust than is maybe needed for a vent cover. I suspect you could stand on it! (do not stand on it)
This takes all the print volume of my P1S. You'll need to put it at an angle. I suggest supporting the edges for adherence at least. Still likely to need less support than printing it flat though!