Android Figurine (Poseable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to look like the original, no longer produced Android figures produced by Dead Zebra https://shop.deadzebra.com
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
Android™ is a trademark of Google LLC. and Dead Zebra created the figure that I based this model on. You absolutely MAY NOT use this model for personal gain ($$$).
The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License.
The arms, legs, and head are all poseable on this model (unless you print the non-poseable model).
With the exception of the arms, each part should print without supports, but supports on the body do help the holes for the arm pegs print more cleanly. You will need to print:
2 Antennae
1 Head
1 Body
2 Arms
2 Arm Pegs
2 Legs
AT LEAST 2 Leg Pegs. Using 4 pegs will lock the legs in place, but using 1 peg for each leg will give you the ability to pose them.
A rigid, one-piece model is also provided, if you want it.
The head and arms are, by default, poseable.
The antennae are very small, so it is recommended that you pint them along with the other pieces so that they do not turn into a mush on your print bed.
Gluing and sanding/finishing are a required part of making this model. I may update it to offer a friction-fit version in the future, if there is enough interest. I expect that most users will want to paint this model, so I have not made it tool-less yet.