Cycliq Fly6 gen2 bike light velcro mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a Cycliq Fly6 generation 2. It's the one which uses a pair of rubber straps to attach to the seat post. But the…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 546
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
I have a Cycliq Fly6 generation 2. It's the one which uses a pair of rubber straps to attach to the seat post.
But the rubber straps keep falling off every time I remove the light from the bike.
So I've created this mount to attach permanently to the light, so a velcro strap can be used to attach to the seat tube instead. Like the Fly6(v) (generation 3, the one with velcro straps).
My seat tube is around 31mm diameter so the ends of the spacer are too, but it should work with seat tubes of different diameters too.
Thanks to mentalbob, whose attachment I started from.
Here's quite a nice comparison of the three Fly6 models that are available as of date of writing. This model is the middle one: https://www.dcrainmaker.com/2016/10/cycliqs-fly6-updated-camera.html
See also my mount extender for the gen3 here: https://www.thingiverse.com/thing:2595457
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.3
Infill:
3%
Category: Sport & Outdoors