Cycliq Fly6(v) gen3 bike light mount extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a Cycliq Fly6(v) rear bike light camera. This is the version with the velcro strap, aka their third version.…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
I have a Cycliq Fly6(v) rear bike light camera. This is the version with the velcro strap, aka their third version.
It's great.
Until I needed to mount on my bike that has a rear carrier- it wasn't possible to get the light close enough to the seat tube to mount correctly.
This spacer solves the problem.
I've used another two velcro tabs to attach the spacer to the seat tube.
My seat tube is around 31mm diameter so the ends of the spacer are too, but it should work with seat tubes of different diameters too.
Here's quite a nice comparison of the three Fly6 models that are available as of date of writing. This model is the third one: https://www.dcrainmaker.com/2016/10/cycliqs-fly6-updated-camera.html
See also my mount for the gen2 here: https://www.thingiverse.com/thing:2602533
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.3
Infill:
30%
Category: Sport & Outdoors