Princess Scorpia from She-Ra
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my Hueforge of Princess Scorpia from She-Ra
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have added a height range modifier for the initial 0.64mm so the layer heights will be off, however once you slice the .3mf it will look fine as you can see from the pictures.
Project: Scorpia.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 150x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm
Filaments Used:
#000000 PLA Sunlu Meta Black Transmission Distance: 1
#57361c PLA Overture Chocolate Transmission Distance: 0.2
#9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
#bb3d43 PLA BambuLab Matte Dark Red Transmission Distance: 1.5
#e8dbb7 PLA BambuLab Matte Desert Tan Transmission Distance: 1
#ffffff PLA+ Sunlu White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #13 (0.64mm) swap to Chocolate
At layer #18 (0.84mm) swap to Maroon Red
At layer #24 (1.08mm) swap to Dark Red
At layer #35 (1.52mm) swap to Desert Tan
At layer #39 (1.68mm) swap to White for the rest