pupiter drink holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
holder can be used on a pupiter
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
hey, i'm aster and the model i made has a lot of meaning to me. This is a drinks holder that you can attach to a popiter or another cylinder or something. I made this for my concert band. first I made a remix on another model from thingiverse that I spent 3 months drawing with trial and error. you should also know that at that moment I was learning inventor all by myself. In those three months I learned a lot from inventor and my remix was there. Still, I was still not satisfied with my design and I chose to design a new one. and here it is, I was able to draw this in two days. and now I'm experimenting with renders and animations.
If you have any tips for my render, I work with Inventor Studio, you can always send me a message. Thank you
i tested the strength of my model and it holds up to 1.5 kg
printer settings
filament: pla/petg
support: organic support in the hole
instructions
you need an M5 screw-in nut and a m5 bolt
some thick tape for on the bolt