Camera Grip for Nikon Zfc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Get a better grip on your non-ergonomic camera!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I love vintage film cameras and even new-but-old-looking cameras like this Zfc but they are a far cry from anything ergonomic. So this sent me on a journey to make a nice-looking and more functional grip that would compliment and not clash with my new Zfc since this is part of my EDC. It features a fuzzy skin texture on the grip portion (the look and feel is best achieved using OrcaSlicer - .3mf available), open bottom for battery and memory access (battery door should be removed before installing the grip), and a friction fit slot for a spare SD card. Oh! and a Zfc logo for congruency 👌🤓
The hole for the ¼-20 screw has a single sacrificial layer that should be cut out after printing. That said, there is no need for supports for this model! Just one clean and easy print 👍
I printed mine in Black ABS for summer vacations' sake but I'm sure PETG would fair just fine. PLA would most likely deform over time.
I hope you find this print useful and please post your makes!
Material: PETG or stronger / more durable material.
Perimeters/Walls: 4 for more strength all-over - especially the grip portion.
Infill: 20% Cubic for the base - 30% Cubic for the grip portion
Brim: Not Necessary
Supports: Not Necessary
If you love this model, please consider Buying Me a Coffee or maybe send a tip via Cash App! ♥
https://buymeacoffee.com/claytr0n
https://cash.app/$claylinco