Miata Teves MK60 ABS Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Miata Teves MK60 ABS Mount
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of a model originally made by yani05. I modified it to be 3d printable and not need the alumin craftworks bracket. You need m6 threaded inserts, m6 bolts, and one special ultra low profile hex head m6 bolt for the back corner. That back corner has issues clearing the connector.
In addition to the main parts are a few optional “washers” which are basically backing plates for all of the fasteners. These are optional, if you want to use these you would get them laser cut out of aluminum. These spread the clamping load of the fastener to a larger area of the printed part reducing the risk of cracking. Pretty inexpensive insurance.