1 / 2
Spool roller for 30cm and 20cm rolls, bottom tube fit — zdjęcie 1
1 / 2

Spool roller for 30cm and 20cm rolls, bottom tube fit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Large enough for 3kg spools from SLANT3D

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
96
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Needed something to start using the 10$/kg spools of tangled, so I made this…  Works well with my Core One.

 

The spools are conical to keep the spool centered like a train wheel.

 

You will need bearing of ID8mm and OD22mm

Tagi