Shimano Combo Cantilever Brake & Shift Lever Bell Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter that allows you to fit a common plastic bell in place of your right shifter on many of these vintage levers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
This should fit most old combo levers from that generation, mine is a ST-M075 if I'm not mistaken. Bell clamp should be 10mm wide, and a standard 22.2 clamp - I designed this around three of those typical little black bells you get with new bikes in Europe.
If not, you can tweak the FreeCad model.
Printing
No supports needed. PETG with 15% infill, concentric top and bottom layers works beautifully for me.
Assembly
You need thew bolt that held the shifter, or any M5x15-ish bolt and (preferably) a nyloc nut. The prongs that keep the shifter from rotating are missing on this adapter, it's friction fit only - but that is not an issue with my bell.