Nothing Ear (case)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stylish two-part case for Nothing Ear earbuds, inspired by the Voronoi design of @Dabrom (Noble Design) on Maker World.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 177
- Wydruki
- 4
- Wyświetlenia
- 697
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for a case for my Nothing Ear charging box — I’m not a fan of the transparent polycarbonate, which shows fingerprints and makes me hesitant to throw it in a pocket with keys. Out of all the options I found, I really liked Dabrom’s remix, so I used his pattern on my own custom case, with a few adjustments.
Easy to print — orient as shown, and use supports only for bridging the USB and pairing button cutouts. I personally used a 0.4 mm nozzle due to the material (PETG-CF), but a smaller nozzle would give better detail on the back side. I printed with 3 perimeters and 1 mm top/bottom shells — essentially making it a solid infill.
