Core One Exhaust Adapter for 4" exhaust duct (up or down)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A smoother 90 degree adapter from the Prusa Core One exhaust to 4" exhaust hose.
- Ocena
- 4 / 5
- Polubienia
- 24
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 707
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a re-design of similar models that exist for adapting the Core One exhaust to a 4 inch duct. I wasn't happy with the available designs, so I started over and designed this with a smooth 90 degree curvature. I've also added support fins to allow this to print at a 45 degree angle so that support material isn't required anywhere in the air path. The result is a beautifully smooth curve that requires as little space behind the printer as possible. You can either mount this to the back of the printer using the existing screw holes, or alternatively press and/or glue 3x8mm magnets into the recesses and use magnets alone (as I am doing).
Printing Guidelines:
I printed mine in PETG, but feel free to use any other mid-high temp filament for this i.e. ASA/ABS etc.. *If you choose to use a ASA or ABS, consider applying the recommended scaling factor in the slicer before printing to ensure that the resulting size ends up as designed.
*Make sure it is oriented to rest on the base of the support fins (see picture)
Add enough perimeters so that the walls of the curve will be solid.
Add paint on supports for the inside edges of the flange and the edges of each of the magnet slots.
Edit 3-13-26*.
I've added two new files to this listing. One is a 90 degree elbow that matches a 120mm fan, for creative installations that would benefit from a non-direct fan mount.
I've added a straight adapter going from a 120mm PC fan to 4 in. exhaust hose as well. You can use two of these to insert a 120mm PC fan at the most convenient location along the exhaust hose, or combine it with the 90 degree elbow to mount it just before a sharp turn out of a window or through a vent.