Accessory Box with Magnetic Lid for Bambu Lab A1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An accessory box with magnetic lid designed for Bambu Lab A1.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The model is to be lightweight while having a relatively large volume. It has 1.2mm wall thickness and requires about 90 gr of filament. It has a magnetic lid that protrudes 5mm for easier lifting. It is designed to be slotted to the right side of Bambu Lab A1.
Dimensions: 15cm × 10cm × 5 cm (width × height × depth). Lid has a 0.5cm protrusion (15.5cm wide).
Non-printed Part Requirements:
- 4 x 2mm circular magnets → Quantity: 8 → For the case lid
- Super glue → For glueing the magnets in place
Check out my poop bucket with integrated deflector for A1: Bambu Lab A1 Poop Bucket.
You have my permission to improve the model, share it, produce it, sell it. Just don't re-upload it without any changes (basically don't have malicious intent). I added the SolidWorks and STEP files so that you can edit easier. If you are using Onshape, you can copy and edit the entire project using the link below.
Huge thanks to @vajojajo for the awesome Bambu Lab A1 CAD model. Because of that model, I didn't need to measure anything myself.
Check out my other Bambu Lab A1 accessories:
Maintenance Tools & Box (Lubing & PTFE Tube)
Poop bucket with a deflector (70 grams)
