Magnetic LED Track 100mm - 45 degree Tilt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic 100mm straight mounting track for LED strips.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 127
- Wydruki
- 1
- Wyświetlenia
- 888
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
I needed a good way to mount LED strips on shelving racks that I keep my printers on. Because they were metal, I thought magnets would offer the most flexibility. I also wanted to be able to angle them at 45 degrees so that they projected more into the center of the shelving unit.
This straight track supports 100mm at a tilt of 45 degrees
These straight tracks use (3) 6mm x 2mm magnets (amazon link to what I used below). The holes for the magnets are slightly larger that the magnet allowing for putting in a dab of glue (I used a hot glue gun) to hold them in.
These would also be great for mounting LED strips on the back of a TV for counter lighting.
Amazon link to Magnets (affiliate link): https://amzn.to/3t0f1pf
I will be adding a series of other tracks like straight pieces, corners and such to match this profile to make the set complete and versatile.
https://www.prusaprinters.org/social/503-crussty/collections/122375