Garden pendant lamp with GU4 LED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I love the shape of this lamp (and so do many visitors in our garden).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
To print the lampshade use the same setting as in the original design. I printed the orange version in Fiberlogy Easy PLA and the blue ones in Fiberlogy Easy PETG. For the diffusers I tried several colors and settled for the orange in the end to get a nice warm shine.
The fitting is a pretty standard Dupont connector, only the outer two contacts are used. They are a nice fit for a 12V GU4 LED capsule.
I only used some melt glue on the top to keep out water, this seems sufficied. The Dupont connector slights int the fitting and this will slight into the lampshade neck. The diffuser can slight over the LED lamp. No glue needed.
The LED's are connected to a 12V LED power source. These lamps have been workning for a couple of month now without any issues and rain doesn't seem to affect them at all.
!! Safety warning !!
Obviously, DON NOT USE G4 Halogeen bulbs!
They will meld the lamp and probably start a fire.
DO NOT USE MAINS POWER TO DIRECTLY POWER ANY OTHER TYPE OF LAMP.
THIS IS NOT SAVE AND CAN LEED TO PERSONAL INJURY AND/OR FIRE!