1 / 4
Gridfinity Bin with Gridfinity Cap (parametric)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1x1xn, 2x1xn and 2x2xn bins with caps, for n from 3 to 10.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (30)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (32)Powiązane
Here are gridfinity bins with gridfinity compatible caps.
Variety of sizes are available: 1x1xn, 2x1xn and 2x2xn, for n from 3 to 10.
The caps do not have to be printed transparent but it is convenient if you can see the content from the outside.
Disclaimer
I know gridfinity bins usually do not need caps or lids.
However, sometimes, people want gridfinity bins with cap, don't they?
Especially when the content is only used once in a few months.
Here are gridfinity bins with caps or lids I have published:
- Lid for Gridfinity Modular Magnet Storage System (1x2 and 2x2)
- Gridfinity 2x1 Battery Bin 12 AA or 26 AAA with Lids (optional)
- Nozzle case for QIDI Plus4 (Gridfinity-compatible 1x1x8)
Printing OPAQUE bins and caps
- No difficulty with no support.
- The cap is designed split in press-fitting two parts for easy printing.
Printing Transparent Caps
- Transparent printing is tricky with 3D printers.
- My instruction can be found here:
https://www.printables.com/model/1371616-gridfinity-2x1-battery-bin-12-aa-or-26-aaa-with-li - With this instruction, you will have so-so transparent caps.
Happy printing!