Magnetic LED Track Inside Corner - 45 degree Tilt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic Inside Corner LED mounting track for LED Strips.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 778
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
I needed a good way to mount LED strips on shelving racks that I keep my printers on. Because they were metal, I thought magnets would offer the most flexibility. I also wanted to be able to angle them at 45 degrees so that they projected more into the center of the shelving unit.
This inside corner track does a smooth twisting transition from 45 degrees to 90 degrees and back to minimize bunching and bending on the track, while allowing it to mate up to the straight tracks units.
These inside corner tracks use (4) 6mm x 2mm magnets (amazon link to what I used below). The holes for the magnets are slightly larger that the magnet allowing for putting in a dab of glue (I used a hot glue gun) to hold them in.
These would also be great for mounting LED strips on the back of a TV for counter lighting.
Amazon link to Magnets (affiliate link): https://amzn.to/3t0f1pf
I will be adding a series of other tracks like straight pieces, corners and such to match this profile to make the set complete and versatile.
https://www.prusaprinters.org/social/503-crussty/collections/122375